Home / Maintenance Tips / Safety

Why does my breaker keep tripping?

Safety · · Bright Light Electrical Solutions

Why does my breaker keep tripping? It is one of the most common questions we get. A breaker that trips once in a great while is doing its job. One that trips again and again is trying to tell you something. Here is how to sort out the difference and what to do next.

What a breaker is protecting

A breaker opens the circuit when too much current flows, which keeps the wiring in your walls from overheating. Most trips come from one of three causes:

  • Overload. Too many things on one circuit, such as a space heater and a microwave sharing the same kitchen or garage line.
  • Short circuit. A hot wire touches a neutral wire, often because of a damaged cord, a loose connection or a failed appliance. This usually trips instantly, sometimes with a pop.
  • Ground fault. Current leaks to ground, often through moisture. In Florida this shows up a lot in bathrooms, garages, lanais and outdoor outlets.

What you can safely try when a breaker keeps tripping

  1. Unplug or switch off everything on the affected circuit.
  2. Push the breaker fully to off, then back to on.
  3. Plug items back in one at a time. If the breaker trips when one particular device runs, that device, or the load on the circuit, is the problem.

If it is a load problem, move high-draw items such as heaters, window air conditioners and kitchen appliances to different circuits.

Stop and call an electrician if
  • the breaker trips right away with nothing plugged in
  • the same breaker trips more than once or twice a week
  • the breaker or panel feels hot, smells burnt, buzzes or crackles
  • you see scorch marks on an outlet, switch or panel
  • a breaker will not stay reset

If you see smoke or flames, get everyone out and call 911. Never remove the panel cover yourself.

Why resetting a tripping breaker again and again is a bad idea

Every trip is a warning. Forcing a breaker back on again and again can hide a wiring fault or overheat a connection. Never swap in a larger breaker to stop the tripping. The wire size sets the safe limit, and a bigger breaker on smaller wire can let the wire overheat before anything trips.

What an electrician checks when a breaker keeps tripping

We look at the load on the circuit, loose connections at the breaker and outlets, a worn-out breaker, damaged wiring and whether the circuit should be split or given a dedicated line. Microwaves, window air conditioners, space heaters and EV chargers often need their own circuit.

Why does my breaker keep tripping after a storm?

After a lightning storm or a power outage, a tripping breaker often points to something damaged by the surge: a GFCI outlet, an appliance control board or a breaker that no longer holds. Moisture is the other common cause in Florida, especially for outdoor, lanai and garage circuits after heavy rain. If the breaker trips the moment you reset it, with everything unplugged, leave it off and call an electrician.

Inside a breaker panel while answering why does my breaker keep tripping
An electrician checks each circuit at the panel.

Three questions to answer before you call

  • Which breaker is it, and what is on that circuit?
  • Does it trip right away, or only when a certain appliance runs?
  • Did anything change recently, like a storm, a new appliance or a remodel?

Your answers help us find why the breaker keeps tripping faster. ESFI has more on basic electrical safety at home. If you are still asking why does my breaker keep tripping after the steps above, our electrical repair service diagnoses the cause, and an electrical panel upgrade is the fix when the panel itself is the problem.

This article is general information, not a substitute for an on-site inspection. Electrical work can be dangerous and often requires a licensed electrician and a permit.

More maintenance tips

All articles

Need an electrician this week?

Call or text (941) 920-8417, 24 hours a day, 7 days a week.