An electrical panel upgrade is a bigger job than most, so it pays to understand it before you start. Here is when an upgrade makes sense, what it involves and how we handle the power company and the county for you.
Signs you may need an electrical panel upgrade
- You are adding a big load, such as an EV charger, a pool heater, a hot tub or a larger air conditioner, and the panel has no space or capacity left.
- Breakers trip often even after you spread out the load, or a breaker feels hot or will not reset.
- The panel is an older model with a poor safety record, such as Federal Pacific Stab-Lok or Zinsco, or it still uses fuses.
- There is rust, scorching or a burning smell at the panel. Call us right away and do not open it yourself.
- Your insurer flagged it on a four-point inspection, which many Florida carriers require for older homes.
We wrote a longer article on the seven signs you may need a panel upgrade if you want more detail.


100 amp to 200 amp: what an electrical panel upgrade involves
Many older homes in Manatee and Sarasota County were built with 100-amp service. Moving to 200 amps usually means a new panel and often new service equipment, so the job is planned in steps:
- Load calculation. We add up what the house needs today and what you plan to add, so the new service is sized correctly.
- Permit. Panel replacements and service upgrades need a permit. We pull it.
- Utility coordination. We schedule the disconnect and reconnect with the power company so the outage is as short as possible.
- Installation. We swap the panel, move every circuit, label it clearly and add any new circuits you asked for.
- Inspection. The county inspects the work and the utility restores power.
Florida lightning is hard on electronics. A panel upgrade is the easiest time to add a whole-home surge protective device, which helps protect appliances, HVAC controls and anything plugged in.
Panel replacement vs. adding a subpanel
Not every capacity problem needs a whole new service. If your service size is fine but the panel is simply full, a subpanel in the garage or a shop can add the breaker spaces you need for less. If the service itself is too small, an electrical panel upgrade is the right fix. We will show you which one you need and why.
Breaker repair and panel safety checks
Sometimes the panel is fine and one breaker is the problem. We replace failed breakers, tighten loose connections, correct double-tapped breakers and update labeling. If your panel is more than a few decades old, a safety check is a good idea even if nothing seems wrong. ESFI explains how the parts of your home electrical system work together.
Planning an EV charger too? Tell us when you call, because it is easier to plan both together. See our EV charger installation service, or request a free quote.

